The water chiller is to provide cooling process to plastic moulds to improve molded products quality and cut down injection cycle time. Hence maximize plastic molding machines' productivity.
Installed with imported compressors, highly efficient shell condenser and evaporator, excellen cooling, quiet and low electricity sonsumption.
Microprocessor control, easy to operate.
Unique open reservior tank made of stainless steel, easy to clean and maintain.
Installed with precise electronic thermostat, accurately maintains temperature within 3-5 ℃.
Installed with curren overload protector, high&low pressure swith, electronic delay timer, fault display system.
LCD screen control chill water inlet&outlet with temperature setting. (optional)

Technical Parameters

MODEL		UNIT	LF3A	LF5A	LF10A	LF15A	LF20A	LF30A
cooling capacity		KW	7.91	12.9	30.5	45	61	92
cooling capacity		Kcal/h	6803	11094	26230	39498	52460	79120
compressor	input power	kw	2.8	4.5	4.5*2	4.5*3	9*2	9*3
compressor	rated power	hp	3	5	5*2	5*3	10*2	10*3
evaporator	type	water tank with coil(shell and tube)
evaporator	pipe diameter	inch	1	1	2	2	2.5	3
refrigerant	type	R22
refrigerant	quantity	kg	2	2	5	7.5	11	12
condenser	type	shell condenser
condenser	pipe diameter	inch	1	1	2	2	2.5	3
cooling water flow		m3/h	1.36	2.22	4.42	7.1	8.84	13.6
water tank capacity		L	50	60	110	200	350	420
pump	power	hp	0.5	0.5	1	2	2	3
	distance	m	23	23	13	15	15	16
	flow rate	l/min	100	100	200	360	360	650

Thermal Protection Air Cooled Heat Pump Chiller With Rotary Evaporator

PET Bottle Blowing Machine